High-pressure pump
HP42-15×2
HP · 50 Hz
HP42-15×2 is a high-pressure pump from the CNP HP range (50 Hz). Rated 110 kW, 25–55 m³/h, head 475–718 m. Net weight 1295 kg.
- One pump or two in series
- Back-to-back impellers balance axial force
- Highest heads in the catalogue
Performance curve Curve-based
Efficiency, shaft power and NPSHr are not published for this model in the source catalogue.
Head versus flow at 50 Hz, 2900 rpm, clean water. Source: Performance table, printed pp. 29–30.
| Flow (m³/h) | Head (m) |
|---|---|
| 25 | 718 |
| 30 | 697 |
| 35 | 670 |
| 40 | 638 |
| 42 | 620 |
| 45 | 597 |
| 50 | 548 |
| 55 | 475 |
Dimensions & weight
| Code | Description | Value |
|---|---|---|
| L1 | overall length | 2605 mm |
| L2 | L2 | 868 mm |
| L3 | L3 | 1118 mm |
| L4 | L4 | 1118 mm |
| L5 | base length | 2413 mm |
| L6 | motor length | 1130 mm |
| L7 | L7 | 620 mm |
| L8 | L8 | 970 mm |
| L9 | L9 | 1050 mm |
| L10 | L10 | 1097 mm |
| H1 | height | 755 mm |
| H2 | axis height | 390 mm |
| — | Net weight | 1295 kg |