Chemical process pump
NIH65-40-250 · 1450 rpm
NIH chemical
NIH65-40-250 · 1450 rpm is a chemical process pump from the CNP NIH chemical range. Rated 12.5 m³/h at 20 m, 2.2 kW.
- Horizontal single-stage single-suction cantilever pump; CFD-optimised hydraulics, efficiency more than 5 % above IH pumps
- Bracket-supported suspension body relieves pipe loads
- Thin-oil lubricated bearings with a bearing separator, service life up to 25,000 h
Rated duty
12.5m³/h
20m head
2.2kW
1450rpm
Dimensions with Y100L-4 motor, 3 kW (mm)
Base No.190 400 B
BL1160
BP190
HC1660
DL380
H1270
H2495
HC2400
BW450
OH95
a100
f635
X1/X28
n-ØBH4-ø24
Inlet D1165
Inlet df1118
Inlet D12145
Inlet D13185
Inlet k1-ød18-ø18
Outlet D2140
Outlet df284
Outlet D22110
Outlet D23150
Outlet k2-ød24-ø18
Dimensions with Y112M-4 motor, 4 kW (mm)
Base No.210 440 A
BL1300
BP210
HC1740
DL400
H1270
H2495
HC2440
BW490
OH95
a100
f635
X1/X28
n-ØBH4-ø24
Inlet D1165
Inlet df1118
Inlet D12145
Inlet D13185
Inlet k1-ød18-ø18
Outlet D2140
Outlet df284
Outlet D22110
Outlet D23150
Outlet k2-ød24-ø18
Dimensions with Y132S-4 motor, 5.5 kW (mm)
Base No.210 440 A
BL1300
BP210
HC1740
DL475
H1270
H2495
HC2440
BW490
OH95
a100
f635
X1/X28
n-ØBH4-ø24
Inlet D1165
Inlet df1118
Inlet D12145
Inlet D13185
Inlet k1-ød18-ø18
Outlet D2140
Outlet df284
Outlet D22110
Outlet D23150
Outlet k2-ød24-ø18
More data
- Pump size
- NIH65-40-250
- Poles
- 4
- Flow range (m³/h)
- 10~15
- Head range (m)
- 16~22
- Efficiency at rated point (%)
- 39.1
- Shaft power at rated point (kW)
- 1.74
- Matching motor, SG 1.0
- Y100L-4/2.2
- Matching motor, SG 1.35
- Y100L-4/3
- Matching motor, SG 1.84
- Y112M-4/4